Help: how to use the double card server + switch +AP to separate and cut out a s

Such as the title, because the software requirements need to disable the original LAN DHCP service, but this service cannot be stopped (hundreds of machines). So I want to use the method of dual card + switch + wireless AP into another IP in the LAN, help you can achieve?
I am now network environment is:
LAN gateway 10.1.0.254
LAN IP 10.1.0.X
The subnet mask 255.255.254.0

To set aside another segment is 192.168.1.X, such as IP

Whether can help?? How to set? The connection method of setting device?

Started by Uriah at December 14, 2016 - 1:37 AM

Help help help help help help

Posted by Uriah at December 28, 2016 - 1:43 AM




Help help

Posted by Uriah at December 29, 2016 - 2:21 AM

Not understand your needs

Posted by Moses at January 12, 2017 - 3:02 AM

The demand is not to use the VLAN switch
Like in the original network divided into a separate segment
The original LAN segment is 10.1.0.X want to partition a network segment is the use of 192.168.0.X dual card server + switch + wireless AP can achieve it?

Posted by Uriah at January 14, 2017 - 3:45 AM

Because do not need to use a platform to the platform. In the opening DHCP service, so want to separate segment segment.
Depressed, do not know how to configure··

Posted by Uriah at January 14, 2017 - 3:46 AM